0
SPC Camber/Caster Sleeve - Ford & Dodge
Item # SPC-2313
Change camber, caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve, then install the correct sleeve. To adjust, the sleeve may be lifted and rotated 1/8 turn.
Part No. Total Change
23131 .25 degree (1/4 degree)
23132 .50 degree (1/2 degree)
23133 .75 degree (3/4 degree)
23134 1.00 degree (1 degree)
23135 1.25 degree (1-1/4 degree)
23136 1.50 degree (1-1/2 degree)
23137 1.75 degree (1-3/4 degree)
23138 2.00 degree (2 degree)
23139 0.00 degree (0 degree)
23132 .50 degree (1/2 degree)
23133 .75 degree (3/4 degree)
23134 1.00 degree (1 degree)
23135 1.25 degree (1-1/4 degree)
23136 1.50 degree (1-1/2 degree)
23137 1.75 degree (1-3/4 degree)
23138 2.00 degree (2 degree)
23139 0.00 degree (0 degree)
Adjustment range: Cam./Cas. ±.25 degree to ±2.00 degree
Installation time: .5 hr/side
Required: 1 per wheel
Installation time: .5 hr/side
Required: 1 per wheel
How can I get free shipping?
Sign up for a vpstiresrepair.com account and you’ll receive free standard shipping on all qualified items. For guest users, standard shipping is free on orders over $50—or a flat $5 for orders totalling less than $50. Please note that additional charges may apply for shipments to Puerto Rico, Alaska and Hawaii. Orders over 200 pounds may also be subject to additional freight shipping requirements and charges...
More info